BAFFI NTF 5000

DESCRIPTION + ILLUSTRATION PHOTO

THE CHASSIS
The slurry tank is designed as a self-supported tank installed on a single-axle chassis.

THE TANK
Produced from steel the tank can be dyed, galvanized, with inside layer from glassfiber laminate or with inside sprayed accid resistant layer. The tank is from inside reinforced and has wave breakers. The deyed one is from inside painted with two-component colour(basic and top). On the closed rear side of the tank is a outlet with a diameter of 420 mm. On this outlet is intalled a tube with connector, to which it is possible to place a closure, connect a suction hose or a spreader. The diameter of the suction hose is in standard 102 mm. On the front side of the tank there are three(or more) holes covered with glass in order to monitor the level of the content inside the tank.

THE COMPRESSOR
The compressor(creating overpressure and underpressure/vacuum)MEC 4000 - product from Battioni Pagani Pompe - Italia is installed on the drawbar. The compressor is a hight quality product with many advancements like automatic lubrication, so it has a long service life.

OPERATION
Loading the tank is performed thanks to the vacuum wich is created by the compressor. Unloading the tank is performed with overpreassure or gravity. The compressor is in the standard version driven by universal joint. In the case of need it is possible to ensure that the compressor will be driven by a fluid motor.

SPREADING SYSTEM
The spreading is done with a spreading head, which is included in the standard equipments. It is possible to use other spreading systems, for example a water cannon, which is installed on the top or on the side of the tank. The cannon rotates with the help of gear ring and pinion, which is driven  with fluid motor.

ROAD TRANSPORT
The slurry tank has the Declaration of Conformity - CE. It can be officially registered and used for road transportation.

USING AND SECURITY

  • withdrawing of liquid waste and liquide manure
  • transport of water, liquide manure to fields and arable lands
  • to ensure watering, spraying and fertilizing
  • to ensure fire fighting in forests or on fields
  • to transit water for constructions, roads or for washing the streets.

THE TANK HAS 4 PROTECTION SYSTEMS:
      1. pressure-relief valve - it prevents the explosion of the tank during pressurization
      2. vacuum valve - it prevents from implosion of the tank during creating vacuum
      3. float ball lock - installed on the top of the tank, prevents that any sediment or water gets to the compressor
      4. desludger - in the case that even a small amount of water gets through the float ball lock, the desludger captures it, so            there is no way that the water gets to the compressor.

TECHNICAL SPECIFICATIONS:

  • Length: 5 080 mm
  • Width: 2 100 mm
  • Height: 2 410 mm
  • Unladen weight: 1 350 kg
  • Total weight: 6 350 kg
  • Tank capacity: 5 000 l
  • Number of wheels: 2
  • Wheel track: from 1 600 mm
  • Wheels: 500/50 x 17
  • Vertical load: 9 KN
  • Required power: 50 HP
  • Time of filling: 3 minutes
  • Compresssor type: MEC 4 000 BATTIONI PAGANI POMPE
  • Capacity of the compressor : 4 350 l/minute

STANDARD EQUIPMENT + OPTIONAL EQUIPMENTS:

  • Suction hose with suction strainer, 6 m long, with diameter 102 mm
  • Compressor with safety valve
  • Spray spoon
  • Blend
  • Oil trap
  • Mudguard with suction hose holder - 2 pieces
  • Float ball lock and desludger
  • Preassure-relief valve and vacuum valve
  • Monitoring holes with glass cover - 3 pieces in the from side
  • Manometer
  • Support leg
  • Changable towing eye
  • Single- or dual-circuit braking system
  • Electric system - 12 V, road lights
  • from inside pasted fiberglass laminate layer or sprayed accid-resistant layer
  • mixing system - a) with the help of a auger/spiral, which is positioned at the bottom of the tank(which is powered by fluid motor) or b) with the help of a tube with air holes
  • water cannon
  • preparation for applicators or with applicators(disc blade injector, line spreading or arable injectors)
  • weighing system - it enables an exact supervision of loading and unloading of the tank and it offert the possibility to set exact dosing with an automatic stop
  • hydraulic suction arm with the possibility to operate it from the tractor cabin(possible electrohydraulic control)
  • possibility to open the whole rear side of the tank
  • hydraulic motor to drive the compressor
  • hydraulic system for opening the drain valve
  • towing eye K80
Privacy preferences
We use cookies to enhance your visit of this website, analyze its performance and collect data about its usage. We may use third-party tools and services to do so and collected data may get transmitted to partners in the EU, USA or other countries. By clicking on 'Accept all cookies' you declare your consent with this processing. You may find detailed information or adjust your preferences below.

Privacy declaration

Show details

Login